In the drop-down menu choose 'Initial ink charge', tick 'Do not increase waste ink pad counter' and click on 'Ink charge'. Click on 'Particular adjustment mode', go to the 'Ink charge' option and click 'OK'. To solve this, open the Resetter software provided with the purchase of your printer. Sometimes the initial charging is not completed correctly, resulting in blank printouts. This will start the initial charging, which can take up to 20 minutes. Once they are full, turn on the printer and press the ink button for a few seconds. Keep all the caps closed except the one you are filling, or you may contaminate other colours. Make sure you load it with the correct colour, which is usually indicated on a label. To do this, open the cap of each tank and fill it with its corresponding ink.
If this is the first time you turn on the printer, you may run into this problem. Now you know the parts, let's go troubleshooting! No colour is coming out Rubber attachment that cleans the head when it comes out of the capping station. This is where the print head rests and flushes the waste ink. We will explain how to clean it and replace it when needed. It’s the component that helps transfer ink, so it requires special care. They are connected to the Ecotank through a hose. These are the cartridges located above the print head. This container must be emptied regularly to avoid any breakdowns. the liquid from cleaning and maintenance of the print head. To prevent the waste pad from filling up, a waste ink tank is added, i.e. It should be filled up to at least one-third full of ink. Container where the ink tanks are located. Before we get to the problems, let’s see some parts of the printer you should know about.
0 kommentar(er)
